Asus P5L-MX IPAT - IDE 設置 ( IDE Configuration )

華碩 P5L-MX/IPAT 主板用戶手冊
2-13
IDEConguration
PATA Master Not Present
PATA Slave Not Present
SATA Port1 Not Present
SATA Port2 Not Present
SATA Port3 Not Present
SATA Port4 Not Present
IDEController [Enabled]
IDEmode [PATA-Primary,SATA-...]
Serial-ATAPort1 [Enabled]
Serial-ATAPort2 [Enabled]
Serial-ATAPort3 [Enabled]
Serial-ATAPort4 [Enabled]
Enable/Disable IDE
Controller
2.4.9 IDE 設置 ( IDE Configuration )
本菜單的項目可讓您設置或更改安裝於系統中的 IDE 設備的設置。若您想要更改選
項的設置值，請選擇該選項後按下 <Enter> 鍵即可調整設置值。
IDE Controller [Enabled]
本項目允許您開啟或關閉內置 IDE 控制器。
設置值有: [Enabled] [Disabled]
IDE Mode [PATA-Primary, SATA-...]
本項目允許您選擇 IDE 模式。設置值有: [SATA only-Primary/Secondary (Non-
combined, Legacy)] [SATA-Primary, PATA-Secondary (combined, Legacy)]
[PATA-Primary, SATA-Secondary (Combined, Legacy)] [PATA only-Primary
(Non-combined, Legacy)] [PATA-Primary, SATA-Ports 1,2,3,4 (Non-combined,
PATA-Legacy)]
Serial-ATA Port1/2/3/4 [Enabled]
本項目允許您開啟或關閉 Serial-ATA 設備。
設置值有: [Disabled] [Enabled]