Asus P5LVM1394 - Page 69

ASUS P5L-VM 1394 2-23
• Refer to the Appendix for details on how to use the EIST feature.
• The motherboard comes with a BIOS le that supports EIST.
Max CPUID Value Limit [Disabled]
Enable this item to boot legacy operating systems that cannot support
CPUs with extended CPUID functions.
Conguration options: [Disabled] [Enabled]
Execute Disable Function [Disabled]
Enables or disables the Execute Disable function. This item appears only
when you install a processor with the Execute Disable function.
Conguration options: [Disabled] [Enabled]
Enhanced C1 Control [Auto]
When set to [Auto], the BIOS will automatically check the CPU’s capability
to enable the C1E support. In C1E mode, the CPU power consumption is
lower when idle. Conguration options: [Auto] [Disabled]
CPU Internal Thermal Control [Auto]
Disables or sets the CPU internal thermal control.
Conguration options: [Disabled] [Auto]
Hyper-Threading Technology [Disabled]
Allows you to enable or disable the processor Hyper-Threading Technology.
Conguration options: [Disabled] [Enabled]
Virtualization Technology [Enabled]
Allows you to enable or disable the processor Virtualization Technology.
Conguration options: [Disabled] [Enabled]
The following item appears only when you installed an Intel
®
Pentium
®
4 and later processors that supports the Enhanced Intel SpeedStep
®
Technology (EIST).
Intel(R) SpeedStep Technology [Automatic]
Allows you to use the Enhanced Intel SpeedStep
®
Technology. When set
to [Automatic], you can adjust the system power settings in the operating
system to use the EIST feature.
Set this item to [Maximum] or [Disabled] if you do not want to use the EIST.
The CPU constantly operates at a lower internal frequency when you set
this item to [Minimum].
Conguration options: [Maximum] [Minimum] [Automatic] [Disabled]