Asus P5M2 - Boot Settings Configuration

4-40
Chapter 4: BIOS setup
4.7.2 Boot Settings Configuration
Select Screen
Select Item
+- Change Option
F1 General Help
F10SaveandExit
ESCExit
v02.58(C)Copyright1985-2004,AmericanMegatrends,Inc.
BIOS SETUP UTILITY
Boot
AllowsBIOStoskip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
BootSettingsConguration
QuickBoot  [Enabled]
FullLogoDisplay  [Enabled]
BootupNum-Lock  [On]
PS/2MouseSupport  [Auto]
POSTErrors  [Enabled]
SetupPrompt  [Enabled]
Interrupt19Capture  [Enabled]
Qu ick Bo ot [En abl ed]
Enabling this item allows the BIOS to skip some power on self tests (POST) while
booting to decrease the time needed to boot the system. When set to [Disabled],
BIOS performs all the POST items.
Conguration options: [Disabled] [Enabled]
Fu ll Log o D isp lay [E nab led ]
Allows you to enable or disable the full screen logo display feature. Conguration
options: [Disabled] [Enabled]
Set this item to [Enabled] to use the ASUS MyLogo2™ feature.
Bo otu p N um- Loc k [ On]
Allows you to select the power-on state for the NumLock.
Conguration options: [Off] [On]
PS /2 Mou se Sup por t [ Aut o]
Allows you to enable or disable support for PS/2 mouse.
Conguration options: [Disabled] [Enabled] [Auto]
PO ST Err ors [E nab led ]
When set to Enabled, the system waits for the F1 key to be pressed when error
occurs. Conguration options: [Disabled] [Enabled]
Se tup Pr omp t [ Ena ble d]
When set to Enabled, the system displays the message “Press DEL to run Setup”
during POST. Conguration options: [Disabled] [Enabled]
In ter rup t 1 9 C apt ure [E nab led ]
When set to [Enabled], this function allows the option ROMs to trap Interrupt 19.
Conguration options: [Disabled] [Enabled]