Asus P5M2 - Adding or Viewing a RAID Configuration

5-14
Chapter 5: RAID configuration
5.2.3 Adding or viewing a RAID configuration
You can add a new RAID conguration or view an existing conguration using the
View/Add Conguration command.
Ad din g a ne w R AID co nfi gur ati on
To add a new RAID conguration:
1. From the
Management Menu, highlight Congure, then press <Enter>.
2. Use the arrow keys to select
View/Add Conguration, then press <Enter>.
3. The
ARRAY SELECTION MENU displays the available drives connected to
the SATA ports. Select the drive(s) you want to include in the RAID set, then
press <SpaceBar>. When selected, the drive indicator changes from READY
to ONLIN A[X]-[Y], where X is the array number, and Y is the drive number.
The information of the selected hard disk drive displays at the bottom of the
screen.