Asus P5N32-SLI Premium - Page 53

ASUS P5N32-SLI Premium 2-27
Connect the right-angle side of SATA
signal cable to the SATA device, or
connect the right-angle side of the
SATA cable to the onboard SATA port
to avoid mechanical conict with huge
graphics cards.
Right-angle side
4. USB connectors (10-1 pin USB56, USB78)
These connectors are for USB 2.0 ports. Connect the USB module cable
to any of these connectors, then install the module to a slot opening at the
back of the system chassis. These USB connectors comply with USB 2.0
specication that supports up to 480 Mbps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
You can connect the USB cable to ASUS Q-Connector (USB, blue) rst, and
then install the Q-Connector (USB) to the USB connector onboard.
P5N32-SLI PREMIUM
®
P5N32-SLI PREMIUM USB 2.0 connectors
USB56
NC
GND
USB_P6+
USB_P6-
USB+5V
GND USB_P5+ USB_P5- USB+5V
1
USB78
NC
GND
USB_P8+
USB_P8-
USB+5V
GND USB_P7+ USB_P7- USB+5V
1