3-20 Chapter 3: Software support
To install the RAID driver in Windows
®
XP:
1. During the OS installation, the system prompts you to press the F6 key to
install third-party SCSI or RAID driver.
2. Press <F6> then insert the oppy disk with RAID driver into the oppy disk
drive.
3. Follow the succeeding screen instructions to complete the installation.
To install the RAID driver in Windows
®
Vista
TM
:
1. Insert the motherboard support DVD or a USB device with RAID driver into
the optical drive/USB port.
2. Follow the succeeding screen instructions to complete the installation.
Due to chipset limitation, the Serial ATA ports supported by the NVIDIA chipset
does not support Serial Optical Disk Drives (Serial ODD).
To Previous Page
Loading...
