4-20 Chapter 4: Software support
Chapter 4
The VID and PID vary with different vendors.
8. Find the [HardwareIds.scsi.iaAHCI_ICH10R] and
[HardwareIds.scsi.iastor_ICH8RICH9RICH10RDO] sections in the txtsetup.oem le.
9. Type the following line to the bottom of the two sections:
id = “USB\VID_xxxx&PID_xxxx”, “usbstor”
7. Use Notepad to open the le.
10. Save and exit the le.
Add the same line to both sections.
To Next Page
Loading...
