Asus P5Q WS - Page 97

ASUS P5Q WS 3-29
Marvell IDE/eSATA [Legacy Mode]
Allows you to disable the onboard Marvell IDE/eSATA controller or set its mode.
Conguration options: [Legacy Mode] [RAID Mode] [Disabled]
If you want to create a RAID 0 or RAID 1 conguration from the Serial ATA hard
disk drives, set this item to [RAID Mode].
If you want to use the Serial ATA hard disk drives as Parallel ATA physical storage
devices, keep the default setting [Legacy Mode].
IDE/eSATA Boot ROM [Enabled]
This item appears only when you set the previous item to [Legacy Mode] or[Legacy Mode] or
[RAID Mode]. Conguration options: [Disabled] [Enabled]. Conguration options: [Disabled] [Enabled]