Asus P5QL SE - 2.4.1 JumperFree Configuration: DRAM and Voltage; CPU Voltage and GTL Reference Settings; DRAM Frequency and Memory Voltage Settings

ASUS P5QL SE 2-15
The follow item appears only when you set the Ai Overclocking item to
[Overclock Prole].
Overclock Options [Overclock 5%]
Conguration options: [Overclock 5%] [Overclock 10%] [Overclock 15%] [Overclock
20%] [Overclock 30%]
DRAM Frequency [Auto]
Allows you to set the DDR2 operating frequency. Conguration options: [Auto] [667MHz]
[800MHz] [1066MHz]
The table below shows the DRAM Frequency conguration options that appear when the
FSB value is 1600, 1333, 1066, and 800.
FSB
DRAM Frequency
Auto 667MHz 800MHz 1066MHz
1600 v v v
1333 v v v v
1066 v v v v
800 v v v
Selecting a very high DRAM frequency may cause the system to become unstable! If this
happens, revert to the default setting.
Memory Voltage [Auto]
Allows you to set the memory voltage. Conguration options: [Auto] [1.87V] [2.00V] [2.13V]
[2.25V]
Setting a very high voltage may damage the component permanently, while setting a very
low voltage may cause the system to become unstable.
NB Voltage [Auto]
Allows you to set the Northbridge voltage. Conguration options: [Auto] [1.129V] [1.199V]
[1.269V] [1.339V]