Asus P6T - Motherboard - ATX - Page 160

4-44 Chapter 4: Software support
Conguring EZ Backup / Super Speed
EZ Backup / Super Speed might erase all original data in both hard disks.
Ensure that you have back up all your data in your hard disks before using the
Drive Xpert function.
To start EZ Backup / Super Speed conguration:
1. Click Drive Xpert Conguration
button.
2. Click EZ Backup / Super Speed from
the Drive Xpert Conguration screen.
3. Click Apply to start conguration.
4. Follow the onscreen instructions to complete the conguration.
5. The Drive Xpert icon on the Windows
®
notication area turns green to indicate that EZ
Backup / Super Speed is set up successfully.
Drive Xpert icon indications
Changing to Normal Mode
This mode allows you to disable the Drive Xpert function and use the two SATA
connectors as onboard SATA connectors.
To change to Normal Mode:
1. Click Normal Mode from the Drive
Xpert Conguration screen.
2. Click Apply to start conguration.
3. Follow the onscreen instructions to
complete the conguration.
Display status Description
Green Drive Xpert is set up successfully
Yellow Hard disk rebuilding
Gray No hard disk detected
Red One hard disk is corrupt
A password conrmation window
appears if you have set up the
password for mode change. If
you forgot the password, you
have to do mode change in BIOS
setup environment.
Click to set up password