2-6 Chapter 2: Hardware information
Chapter 2
5. Remove the PnP cap from the CPU
socket.
PnP cap
To prevent damage to the socket pins,
do not remove the PnP cap unless
you are installing a CPU.
2. Press the load lever with your thumb
(A), then move it to the left (B) until it is
released from the retention tab.
A
B
Load lever
Retention tab
3. Lift the load lever in the direction of the
arrow to a 135º angle.
4. Lift the load plate with your thumb and
forenger to a 100º angle.
Load plate
4
3
To Next Page
Loading...
