4-38 Chapter 4: Software support
Restoring to factory settings
In the rare case that the system settings become corrupted, you can restore
Express Gate to its factory settings.
To restore Express Gate to factory settings
1. Click Conguration Panel in the LaunchBar.
2. In the Conguration Panel, click Environment Settings.
3. In the General tab, click Restore. A conrmation dialog box will open. Click
Yes to immediately restart Express Gate to nish clearing system settings. All
bookmarks, network settings, and other changes you made will be cleared.
The rst-time Wizard will run again when you enter the Express Gate
environment after clearing its settings.
Conguring Express Gate in BIOS Setup
Enter BIOS setup by clicking Exit on the Express Gate First Screen, and then
press the <Del> key during POST. Express Gate conguration options are under
the Tools menu. See chapter 3 for details.
BIOS SETUP UTILITY
Main Ai Tweaker Advanced Power Boot Tools Exit
ASUS EZ Flash 2
Express Gate [Enabled]
Enter OS Timer [10 Seconds]
Reset User Data [No]
ASUS O.C. Prole
AI NET 2
The BIOS setup screens shown in this section are for reference purposes only,
and may not exactly match what you see on your screen.
To Next Page
Loading...
