Asus P6T7 WS SuperComputer - Motherboard - SSI CEB - G.P. Diagnosis Card Installation; Diagnosis Card Layout; Installing G.P. Diagnosis Card

2.8 G.P. Diagnosis card installation
2.8.1 G.P. Diagnosis card layout
1. Locate the TPM connector (20-1 pin TPM) on the motherboard.
2. With the LEDs of the diagnosis
card facing to the PCIe slots, align
the card connector with the TPM
connector and press rmly until
the card sits on the connector
completely.
Ensure to turn off the power supply unit before installing the diagnosis card to
avoid electrical shock hazard.
2.8.2 Installing G.P. Diagnosis card
LED 0 and 1
Card connector
Power Switch. Press
to turn ON or OFF the
computer.
Reset Button.
Press to restart the
computer.
2-34 Chapter 2: Hardware information