Asus P7H55-M LX USB3 - Tools Menu; ASUS EZ Flash 2; IO Level up [Disabled]

ASUS P7H55-M LX/USB3 2-19
Change User Password
Select this item to set or change the user password. The User Password item on top of the
screen shows the default Not Installed. After you set a password, this item shows Installed.
To set a User Password:
1. Select the Change User Password item and press <Enter>.
2. On the password box, key in a password containing up to six letters, or numbers, or
both, then press <Enter>.
3. Conrm the password when prompted.
The message Password Installed appears after you set your password successfully.
To change the user password, follow the same steps in setting a user password.
Clear User Password
Select this item to clear the user password.
Password Check [Setup]
When set to [Setup], BIOS checks for user password when accessing the Setup utility. When
set to [Always], BIOS checks for user password both when accessing Setup and booting the
system. Conguration options: [Setup] [Always]
2.7 Tools menu
The Tools menu items allow you to congure options for special functions. Select an item then
press <Enter> to display the sub-menu.
AI NET 2
ASUS EZ Flash 2
IO Levelup [Disabled]
LAN Cable Status
2.7.1 AI NET 2
Check Atheros LAN cable [Disabled]
Enables or disables checking of the Atheros LAN cable during the Power-On Self-Test
(POST). Conguration options: [Disabled] [Enabled]
2.7.2 ASUS EZ Flash 2
Allows you to run ASUS EZ Flash 2. When you press <Enter>, a conrmation message
appears. Use the left/right arrow key to select between [Yes] or [No], then press <Enter> to
conrm your choice. Please see section 2.1.2 for details.
2.7.3 IO Level up [Disabled]
Enables or disables the USB 3.0 function. Conguration options: [Disabled] [USB 3.0]
P7H55-M LX/USB3 BIOS Setup Version 0205
Main Advanced Power Boot Tools Exit