Asus P8P67 PRO - Page 33

ASUS P8P67 PRO REV 3.1 2-15
Chapter 2
• In single VGA card mode, use the PCIe 2.0 x16_1 slot (navy blue) for a PCI Express
x16 graphics card to get better performance.
• In CrossFireX™ or SLI™ mode, use the PCIe 2.0 x16_1 and PCIe 2.0 x16_2 slots for
PCI Express x16 graphics cards to get better performance.
• We recommend that you provide sufcient power when running CrossFireX™ or SLI™
mode. Refer to page 2-25 for details.
• Connect a chassis fan to the motherboard connector labeled CHA_FAN1/2 when using
multiple graphics cards for better thermal environment. See page 2-23 for details.
IRQ assignments for this motherboard
A B C D E F G H
PCIEx16_1 shared – – – – – – –
PCIEx16_2 shared – – – – – – –
PCIEx16_3 – shared – – – – – –
PCIEx1_1 – – shared – – – – –
PCIEx1_2/USB3_2 – shared – – – – –
PCI_1 – – shared – – – – –
PCI_2 – – – shared – – – –
LAN_1 – – – shared – – –
USB 2.0 Controller 1 – – – – – – – shared
USB 2.0 Controller 2 – – – – – – – shared
USB 3.0 Controller shared
SATA Controller – – shared – – – – –
SATA 6G Controller (IO
Levelup disabled or set
to USB 3.0)
– – – shared – – – –
JMicron ATA Controller – – shared – – – – –
1394 Controller – shared – – – – – –
HD Audio – – – – – – shared –
* Please refer to 3-20 for details.
PCIEX16_3
conguration
PCI Express sharing mode
PCIEX16_3 PCIEX1_1 PCIEX1_2 USB3_34
ESATA &
PESATA
Auto Mode
X1 X1
N/A
X1 X1
X4 Mode
X4
(Recommend
for high speed
device)
N/A N/A N/A N/A
X1 Mode
X1 X1 X1
N/A
X1