Asus P8P67 REV 3.1 - Page 43

ASUS P8P67 REV 3.1 2-25
Chapter 2
4. USB 3.0 connector (20-1 pin USB3_34)
This connector is for the additional USB 3.0 ports, and complies with USB 3.0
specication that supports up to 480 MBps connection speed. If the USB 3.0 front
panel cable is available from your system chassis, with this USB 3.0 connector, you
can have a front panel USB 3.0 solution.
Never connect a 1394 cable to the USB connectors. Doing so will damage the motherboard!
5. USB 2.0 connectors (10-1 pin USB910, USB1112, USB1314)
These connectors are for USB 2.0 ports. Connect the USB module cable to any of
these connectors, then install the module to a slot opening at the back of the system
chassis. These USB connectors comply with USB 2.0 specication that supports up to
48 Mbps connection speed.