Asus P8Z77-I DELUXE - Page 140

4-34 Chapter 4: Software support
Chapter 4
Using Quick Connection
Conguring the PPPoE connection settings
Before enabling the Network iControl’s Quick Connection functions, you must congure the PPPoE
connection settings
To congure the PPPoE settings:
Right-click in the taskbar, and select Open Network and Sharing Center.
.
Right-click the PPPoE Connection, and select Properties.
Click the Options tab, and deselect Prompt for name and password, certicate, etc. Click OK to
complete the auto PPPoE connection settings.
You only need to congure the PPPoE connection settings once.
Obtain the necessary information about your PPPoE connection from your
network provider.
1.
2.
3.
•
•