Asus P9D WS - Page 150

5-4 Chapter 5: Multiple GPU technology support
Chapter 5
5.1.5 Installing four CrossFireX™ graphics cards
1. Prepare four CrossFireX-ready graphics cards.
2. Insert the four graphics card into the PCIEX16 slots. Refer to Chapter 1 in this user
manual for the locations of the PCIEX16 slots recommended for multi-graphics card
installation.
3. Ensure that the cards are properly seated on the slots.
4. Align and rmly insert the four
CrossFireX bridge connectors to the
goldngers on each graphics card.
Ensure that the connectors are rmly
in place.
5. Connect four independent auxiliary
power sources from the power
supply to the four graphics cards
separately.
6. Connect a VGA or a DVI cable to the
graphics card.