3. Marvell
®
Serial ATA 6.0 Gb/s connectors
(7-pin SATA6G_E1/E2 [navy blue])
These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial
ATA 6.0 Gb/s signal cables.
• For high performance of ASUS SSD Caching, please connect one HDD and
one SSD to Marvell
®
SATA6G_E1/E2 connectors.
• For regular usage, the SATA6G_E1/E2 connectors are recommended for data
drivers.
•
You must install Windows
®
XP Service Pack 3 or later versions before using
Serial ATA hard disk drives.
• Press <Ctrl> + <M> during POST to enter the Marvell RAID utility to create
or delete a RAID conguration.
• If you want to install a Windows operating system to a RAID conguration
created using the Marvell SATA controller, you have to create a RAID driver disk
using the motherboard support DVD and load the driver during OS installation.
For 32/64bit Windows XP OS, load rst the Marvell shared library driver,
and then load Marvell 91xx SATA Controller Driver. For Windows Vista /
Windows 7 OS, load only the Marvell 91xx SATA Controller Driver.
To Next Page
Loading...
