Asus PA169CDV - OSD Image Settings; Image Adjustment Options

3-6
Chapter 3: General Instruction
• Color Reset: Reset the color related settings.
» Current mode color reset:
Reset the color settings of the current color mode to the factory
default value.
» All modes color reset:
Reset the color settings of all color modes to the factory default
value.
4. Image
Set the image related setting from this menu.
Sharpness
Preset
Blue Light
Palette
Image
Sound
Back Enter Exit
Trace Free
Aspect Control
Input Range
0
60
PA169CDV Preset
2160p Standard Mode
Signal
HDMI
Brightness
10060Hz
• Sharpness: The adjusting range is from 0 to 100.
• Trace Free: Adjust the response time of the monitor.
• Aspect Control: Adjust the aspect ratio to Full, 4:3, 1:1, or OverScan.
• To activate this function, you need to do the following: turn off the
PBP mode.
• 4:3 is only available when input source is in 4:3 format. OverScan is
only available for the HDMI input source.
• Input Range: Adjust the input range to Auto, Full, or Limited 16-235.