Asus PA169CDV - OSD Signal and System Settings; Signal Input Selection; System Settings Configuration

3-10
Chapter 3: General Instruction
8. Signal
In this function, you can select your desired input source.
HDMI
PIP/PBP
QuickFit Plus
Signal
Settings
Back Enter Exit
USB Type-C
PA169CDV Preset
2160p Standard Mode
Signal
HDMI
Brightness
10060Hz
9. Settings
Allow you to adjust the system.
Auto Rotation
PIP/PBP
QuickFit Plus
Signal
Settings
Back Enter Exit
Touch Screen
OSD Setup
Key Lock
Power Indicator
Language
Information
All Reset
PA169CDV Preset
2160p Standard Mode
Signal
HDMI
Brightness
10060Hz
• Auto Rotation: Enable or disable the automatic OSD rotation function.
• Touch Screen: Enable or disable the touch screen function.
• OSD Setup: Configure the OSD menu settings.
» OSD Timeout: Adjust the OSD timeout from 10 to 120 seconds.
» Transparency: Adjust the OSD background from opaque to
transparent.
• Key Lock: Select “On” to disable the Power and Menu buttons. To cancel
the Key Lock function, press the Menu button for more than five seconds.
• Power Indicator: Turn the power LED indicator on/off.
• Language: Select the OSD menu language.