Asus PA248CRV Series - Palette Color Adjustments

3-4 Chapter 3: OSD (On-Screen Display) menu
2. Palette
Set a desired color setting from this menu.
Preset
Native Mode
Signal
DisplayPort
Brightness
50
ExitBack Enter
Image
Preset
Palette
50
80
50
50
Brightness
Contrast
Saturation
Hue
Color Temp.
Gamma
RGB Tuning
Black Level
QuickFit Plus
Signal
PA248CRV
1920 x 1200_60Hz
• Brightness: The adjusting range is from 0 to 100.
• Contrast: The adjusting range is from 0 to 100.
• Saturation: The adjusting range is from 0 to 100.
• Hue: Shifts the image color between green and purple.
• Color Temp.: Contains 5 modes including 9300K, 6500K, 5500K,
5000K and P3-Theater. P3-Theater is only available for DCI-P3 Mode.
• Gamma: Allows you to set the color mode to 2.6, 2.4, 2.2, 2.0 or 1.8
(Mac).
• RGB Tuning:
* Gain: The adjusting range is from 0 to 100.
* Offset: The adjusting range is from 0 to 100.
• Black Level: To adjust the initialized 1st signal level of darkest gray
level.
* Signal: The adjusting range is from 0 to 100.
• Color Reset:
* Current mode color reset:
Resets the color settings of current color mode to the factory
default value.
* All modes color reset:
Resets the color settings of all color modes to the factory default
value.