3-6 Chapter 3: OSD (On-Screen Display) menu
4. QuickFit Plus
In this function, you can use different kinds of alignment patterns.
Preset
Native Mode
Signal
DisplayPort
Brightness
50
ExitBack Enter
Preset
Palette
Image
QuickFit Plus
Safe Area
Center Marker
Customization
Ruler
Signal
PA248CRV
1920 x 1200_60Hz
• Safe Area: Facilitates designers and users to organize content and
layout on one page and achieve a consistent look and feel. The selections
are: 1:1, Action Safe, Title Safe, 3 x 3.
• Center Marker: Adjusts the Type 1, Type 2, Type 3.
• Customization: You can decide the frame size by moving the
Menu (5-way) button up/down/left/right. You can press the
Menu
(5-way) button for longer than 3 seconds to switch the measurements
between millimeter and inch.
• Ruler: This pattern presents physical ruler on top and left side. You can
press the
Menu (5-way) button for longer than 3 seconds to switch the
measurements between metric and imperial.
To Next Page
Loading...
