Asus PA248CRV Series - Signal Input Source Selection

3-7ASUS PA248CRV Series LCD Monitor
5. Signal
In this function, you can select your desired input source.
Preset
Native Mode
Signal
DisplayPort
Brightness
50
ExitBack Enter
Preset
Palette
Image
QuickFit Plus
Signal
Auto Detection
HDMI 1
HDMI 2
DisplayPort
USB Type-C
PA248CRV
1920 x 1200_60Hz
• Auto Detection: automatically detects other active signals when
current input signal is inactive.
To activate this function, you need to do the following: remove the connection
of Daisy-Chain DisplayPort output (to disable MST output).