3-8 Chapter 3: OSD (On-Screen Display) menu
6. Settings
Allows you to adjust the system.
Preset
Native Mode
Signal
DisplayPort
Brightness
50
ExitBack Enter
Shortcut
Media sync
Settings
Language
Sound
Power Saving
OSD Setup
DisplayPort Stream
Key Lock
Power Indicator
PA248CRV
1920 x 1200_60Hz
• MediaSync: Turn on VESA MediaSync support.
* MediaSync can only be activated within 48Hz ~ 60Hz.
* For supported GPUs, minimum PC system and driver
requirements, please contact the GPU manufactures.
• Power Saving: Select Normal Level for power on hub during power
saving. Select Deep Level for power off hub during power saving.
To activate daisy chaining, you need to do the following: set Power Saving to
Normal Level. Note: Input port will be xed (no auto detection) when DP out
cable is plugged.
• OSD Setup:
* Adjusts the OSD Timeout from 10 to 120 seconds.
* Enables or disables the DDC/CI function.
* Adjusts the OSD background from Opaque to Transparent.
* Enables or disables the OSD Auto Rotation function.
To Next Page
Loading...
