Asus PA278CGV Series - Signal Input Selection; System Settings

3-8 Chapter 3: OSD (On-Screen Display) menu
6. Signal
In this function, you can select your desired input source or decide if you
want the monitor to automatically searches for input sources.
PA278CGV
2560x1440_144Hz
Native Mode 50
Navigate Select Exit
Preset Signal
DisplayPort
Brightness
Signal
Settings
Shortcut
HDMI-1
HDMI-2
DisplayPort
USB Type-C
Auto Detection
7. Settings
Allows you to adjust the system.
PA278CGV
2560x1440_144Hz
Native Mode 50
Navigate Select Exit
Preset Signal
DisplayPort
Brightness
FreeSync Premium
Dynamic Dimming
Power Saving
OSD Setup
Sound
DisplayPort Stream
Key Lock
Signal
Settings
Shortcut
• FreeSync Premium (HDMI, DisplayPort, USB Type C): Allows an
FreeSync Premium supported* graphics source to dynamically adjust
display refresh rate based on typical content frame rates for power
efcient, virtually stutter free and low-latency display update.
* FreeSync Premium can only be activated within 30Hz~144Hz (HDMI,
DisplayPort, USB Type C).
* For supported GPUs, minimum PC system and driver requirements, please
contact the GPU manufactures.
To activate this function, you need to do the following: turn off PIP/PBP, turn off
Mirror Mode, set Aspect Control to Full.