3-10 Chapter 3: OSD (On-Screen Display) menu
• OSD Setup:
* Adjusts the OSD Timeout from 10 to 120 seconds.
* Enables or disables the DDC/CI function.
* Adjusts the OSD background from Opaque to Transparent.
* Enables or disables the OSD Auto Rotation function.
To activate OSD Auto Rotation, you need to do the following: turn off PIP/PBP.
• Sound:
* Adjusts Volume from 0 to 100.
* Mute or un-Mute the audio output.
* Select audio input from PIP/PBP Sources.
To activate Sound function, you need to do the following: turn on PIP/PBP.
• DisplayPort Stream: Compatibility with graphic card. Select
DisplayPort 1.2, DisplayPort 1.4 or DisplayPort 1.4 + USB
3.2 by graphic card DP version.
To activate daisy chaining, you need to do the following: set Power Saving to
Normal Level. Note: Input port will be xed (no auto detection) when DP out
cable is plugged.
• Key Lock: To disable all function keys. Push the 5-way button down for
over 5 seconds to cancel the key lock function.
• Power Indicator: Turns the power LED indicator on/off.
• Language: There are 22 languages for your selection, including
English, French, German, Italian, Spanish, Dutch, Portuguese, Russian,
Czech, Croatian, Polish, Romanian, Hungrian, Turkish, Simplied
Chinese, Traditional Chinese, Japanese, Korean, Thai, Indonesian,
Persian, Ukrainian.
• Information: Shows the monitor information.
• All Reset: “Yes” allows you to restore the default settings.
To Next Page
Loading...
