Asus PA328CGV Series - Monitor introduction; Using the Controls button

1-5
ASUS LCD Monitor PA328 Series
1.6 Monitor introduction
1.6.1 Using the Controls button
Use the control button on the bottom of the monitor to adjust the image
settings.
1
25
4
367
Menu
Exit
Brightness
Blue Light
Signal
Power
Preset
1. Menu(5-way)button:
• Press this button to enter the OSD menu.
• EnactstheselectedOSDmenuitems.
• Increases/Decreases values or moves your selection up/down/left/right.
2. Close Button:
• ExittheOSDmenu.
3. Shortcut 1:
• Default: Brightness hotkey
• Tochangethehotkeyfunction,gototheShortcut>Shortcut1menu.
4. Shortcut 2:
• Default: Blue light filter hotkey
• Tochangethehotkeyfunction,gototheShortcut>Shortcut2menu.
5. Input Select Button
• UsethishotkeytoswitchfromHDMI-1,HDMI-2,DisplayPort,USB
Tpye-C
6. ProArtPreset
• Press this button to select Preset mode.