Asus PA328QV Series - Connecting Cables and Powering On

2-3ASUS PA328QV Series LCD Monitor
90°
90°
It is normal that the monitor slightly shakes while you adjust the viewing angle.
2.4 Connecting the cables
Connect the cables as the following instructions:
For service only
• To connect the power cord: Connect one end of the power cord securely to
the monitor’s AC input port, the other end to a power outlet.
• To connect the DisplayPort/HDMI cable:
a. Plug one end of the DisplayPort/HDMI cable to the monitor’s
DisplayPort/HDMI jack.
b. Connect the other end of the DisplayPort/HDMI cable to your computer's
DisplayPort/HDMI jack.
• To use the earphone: connect the end with plug type to the monitor’s
earphone jack when an HDMI/DisplayPort signal is fed.
• To use the USB 3.2 Gen 1 ports:
»
Upstream: Use the supplied USB Type-B to Type-A cable. Make sure
your computer is installed with the latest Windows 10/Windows 11
operating system. That will enable the USB ports on the monitor to work.
»
Downstream: Plug the USB Type-A cable of your device to the monitor's
USB Type-A jack.
When these cables are connected, you can choose the desired signal
from the Signal item in the OSD menu.