Asus PA329CV Series - System Settings and Customization

3-9
ASUS LCD Monitor PA329 Series
9. Settings
PA329CV
3840 x 2160 60Hz
ProArt
Preset
Standard Mode
Signal
DisplayPort
Brightness
50
Exit
Back
Enter
Signal
QuickFit Plus
Shortcut
Settings
PIP/PBP
PA329CV
3840 x 2160 60Hz
ProArt
Preset
Standard Mode
Signal
DisplayPort
Brightness
50
Exit
Back
Enter
Signal
QuickFit Plus
Shortcut
Settings
PIP/PBP
Adaptive-Sync
USB Setup
Power Level
OSD Setup
DisplayPort Stream
Key Lock
Power Indicator
Information
Language
ALL Reset
YES
NO
• Adaptive-Sync: ItcanallowaAdaptive-Syncsupportedgraphicssource
to dynamically adjust display refresh rate based on typical content frame
rates for power efficient, virtually stutter free and low-latency display
update.
1.*ForsupportedGPUs,minimumPCsystemanddriver
requirements,pleasecontacttheGPUmanufactures.
2. To activate this function, you need to do the following: set
DisplayPort Stream to DisplayPort 1.2, turn off Rapid Rendering
Mode.
• USB Setup: Configures the USB Type C port setting. The USB
Setup parameter affects the output resolution only when the source is
connected to the USB Type C port. Due to the technological differences
betweenUSB2.0andUSB3.1,THEmaximumUSBdatathroughput
(bandwidthandotherrelatedcharacteristics)variesandtherefore
influences the maximum output resolution.