Asus PA32DC - Page 29

3-3
ASUS PA32DC OLED Monitor
• HDR_PQ Rec2020: Presents ST2084 with Rec.2020 color gamut and
D65 white point.
» PQ Optimized: Delivers the optimized HDR performance of this
display with as much accuracy as with ST2084 in terms of display
luminance capability.
» PQ Clip: Preserves PQ curve till displaying maximum luminance with
accuracy. ST2084 code value with higher than display maximum will
be mapped to the maximum luminance.
» PQ Basic: Presents HDR performance of general HDR supported
displays.
• HDR_HLG BT2100: Compliant with BT2100.
• HDR_HLG DCI: Compliant with DCI-P3.
• HDR_DolbyVision: Selects the DolbyVision lighting type.
» Bright: Compliant with DolbyVision Bright mode settings.
» Dark: Compliant with DolbyVision Dark mode settings.
• User Mode 1/User Mode 2: You can save one or two ProArt Calibration
profiles as User Mode 1/User Mode 2 after executing ProArt Calibration
and then have quick access here.
Please apply the following settings while performing ProArt color calibration:
• Set output dynamic to full range.
• Set output color format to RGB.
• Set output color depth to 8 bit.
Below tables show the default congurations for each ProArt Preset mode:
Function Standard sRGB AdobeRGB Rec 709
Color Temp. 6500K Fixed (6500K) Fixed (6500K) 6500K
Brightness 50 Fixed 80nits 160nits 100nits
Contrast 80 80 80 80
Sharpness Enable (0) Enable (0) Enable (0) Enable (0)
Saturation Middle (50) Disable Middle (50) Middle (50)
Hue Middle (50) Disable Middle (50) Middle (50)
ProArt Pallette/
Color
Enable (default) Disable Enable (default) Enable (default)
Black Level Enable (default) Enable (default) Enable (default) Enable (default)
Gamma Enable (2.2) Fixed (2.2) Fixed (2.2) Enable (2.4)
Light Effect Enable (default) Disable Enable (default) Enable (default)
Adaptive Color Enable (default) Disable Disable Enable (default)
Uniform
Brightness
Enable
(default: Off)
Disable (On)
Enable
(default: On)
Enable
(default: On)