Asus PA34V Series - Setup; 2.1 Attaching the Stand

2-1ASUS PA34V Series LCD Monitor
2.1 Attaching the stand
Do not remove the monitor from the packaging box before attaching the stand.
To assemble the monitor base:
1. After opening the box, remove the foam cushions and stand in turn from the
top of the package and open the box as illustrated. (Figure 1)
b
a
c
(Figure 1)
2. Lift the cover to expose the VESA area for stand assembly. (Figure 2)
3. Attach the stand into the back of the monitor, making sure the tab on the arm
ts into the groove on the back of the monitor. (Figure 3)
4. Place the monitor upright. (Figure 4)
Do not press on the screen when lifting the monitor. Lift the monitor carefully to
prevent it from slipping or falling.
5. Remove the cover from the monitor. (Figure 5)