Asus PB62 - Page 40

40 ASUS Mini PC PB62
To install an M.2 SSD to the bottom M.2 slot
1. Remove the following items before proceeding:
2.5” Storage bay Please refer to steps 1 - 2 under the Installing
2.5” HDD or SSD section to remove the 2.5”
storage bay.
Heatsink and fan
module
Please refer to steps 1 - 2 under the Installing
the CPU section to remove the heatsink and
fan module and cables.
2. Remove the congurable port by removing the three (3) screws
securing it, then lifting it out of the chassis.
3. Disconnect the speaker cable.
4. Remove the remaining ve (5) screws securing the motherboard to
the chassis.