Asus PG27AQ series - Blue Light Filter; Color Settings

3-2
Chapter 3: General Instructions
 No change.
  The higher the level, the less blue light is scattered.
When Blue Light Filter is activated,the default settings of Racing Mode
will be automatically imported. Between Level 1 to Level 3, the Brightness
function is user-configurable. Level 4 is optimized setting. It is compliance
with TUV Low Blue Light Certification. The Brightness function is not user-
configurable.
 
You can adjust Brightness, Contrast, Saturation and Color temperature from
this menu.
MOVE/ENTER
BACK
EXIT
Brightness
Contrast
Saturation
Color Temp.
80
50
100
Blue Light Filter
Color
Image
Input Select
System Setup
Normal Mode DisplayPort 3840 x 2160@ 60Hz
Racing Mode
ASUS ROG PG27A
 : the adjusting range is from 0 to 100.
 : the adjusting range is from 0 to 100.
 : The adjusting range is from 0 to 100.
 : contains 4 modes including Cool, Normal, Warm, and User
Mode.
 
You can adjust OD from this menu.
MOVE/ENTER
BACK
EXIT
OD
Blue Light Filter
Color
Image
Input Select
System Setup
Normal Mode DisplayPort 3840 x 2160@ 60Hz
Racing Mode
ASUS ROG PG27A
 : Improves the gray level response time of the LCD panel.