PN Series
37
3. Before replacing the bottom cover, ensure to remove the plastic lm
on the thermal pad, if there is one.
Thermal pad
Plastic lm
NOTE: The specications for the thermal pad used in this Mini PC are
as follows:
Thickness: 2.5 mm
Size: 65 mm x 20 mm
Thermal conductivity: 3 W/mK
Hardness: < 40 Sc
CAUTION! Heat dissipation performance may still vary even when
you have replaced the thermal pad with one that meets the above
specifications. To prevent possible damage to the M.2 SSD, you
should have the thermal pad replaced by a service center near you.
To Next Page
Loading...
