PN Series
17
USB 3.2 Gen 2 port
The USB 3.2 Gen 2 (Universal Serial Bus) port provides a
transfer rate up to 10 Gbit/s.
USB 3.2 Gen 2 Type-C® / DisplayPort / Power (DC)
input combo port
This USB Type-C® (Universal Serial Bus) port provides the
following:
• Transfer rate of up to 10 Gbit/s.
• Support for power (DC) input when connected to an
external device that is PD (Power Delivery) compliant
with a 20V / 5A output.
• USB power delivery with a maximum of 5V / 3A output.
• Support for DisplayPort 1.4. Use a USB Type-C® adapter
to connect your Mini PC to an external display.
NOTE: When using only this port as a display output
source, this port will support a resolution of up to
5120 x 2160 @60Hz. The resolution may also be
aected by the cabling and output device.
CAUTION!
• DO NOT connect your Mini PC to a device that
supports less than 20V / 5.0A PD when using
the USB 3.2 Gen 2 Type-C® port as a power (DC)
input port. Doing so may cause problems when
powering on your Mini PC.
• When using the USB 3.2 Gen 2 Type-C® port as
a power (DC) input port, ensure to remove the
cable from the Power input port.
• Ensure to power o your device when switching
between the USB 3.2 Gen 2 Type-C® port and
Power input port.