1-4
Chapter 1: Product introduction
Chassis intrusion header (4-1 pin CHASSIS)
Thisheaderisforachassis-mountedintrusiondetectionsensororswitch.Connect
oneendofthechassisintrusionsensororswitchcabletothisconnector.The
chassisintrusionsensororswitchsendsahigh-levelsignaltothisconnectorwhen
achassiscomponentisremovedorreplaced.Thesignalisthengeneratedasa
chassisintrusionevent.
Front panel audio connector (10-1 pin AAFP)
Thisconnectorisforachassis-mountedfrontpanelaudioI/Omodulethatsupports
HDaudiostandard.ConnectoneendofthefrontpanelaudioI/Omodulecableto
thisconnector.
• Werecommendthatyouconnectahigh-denitionfrontpanelaudiomoduletothis
connectortoavailofthemotherboard’shigh-denitionaudiocapability.
• Ifyouwanttoconnectahigh-denitionfrontpanelaudiomoduletothisconnector,
settheFrontPanelTypeitemintheBIOSsetupto[HDAudio].
PCI Express 2.0 x1 slot
ThismotherboardhasonePCIExpress2.0x1slotthatsupportsPCIExpressx1
networkcards,SCSIcards,andothercardsthatcomplywiththePCIExpress
specication.
Serial port connector (10-1 pin COM)
Connecttheserialportmodulecabletothisconnector,theninstallthemoduletoa
slotopeningatthebackofthesystemchassis.
PCI Express 3.0/2.0 x16 slot
ThismotherboardsupportsaPCIExpress3.0/2.0x16graphiccardthatcomplies
withthePCIExpressspecications.
LPT connector (26-1 pin LPT)
TheLPT(LinePrintingTerminal)connectorsupports
devicessuchasaprinter.LPTstandardizesasIEEE1284,
whichistheparallelportinterfaceonIBMPC-compatible
computers.
PIN 1
O_LPT_XSTB#_R
O_LPT_XPD0_R
O_LPT_XPD1_R
O_LPT_XPD2_R
O_LPT_XPD3_R
O_LPT_XPD4_R
O_LPT_XPD5_R
O_LPT_XPD6_R
O_LPT_XPD7_R
O_LPT_ACK#_R
O_LPT_BUSY_R
O_LPT_PE_R
O_LPT_SLCT_R
O_LPT_XAFD#_R
O_LPT_ERROR#_R
O_LPT_XINIT#_R
O_LPT_XSLIN#_R
GND
GND
GND
GND
GND
GND
GND
GND