Asus PRIME H510M-A R2.0 - 10-1 Pin System Panel Header

1-6
18. 10-1 pin System Panel header
This header supports several chassis-mounted functions.
• System Power LED header (+PWR_LED-)
The 2-pin header allows you to connect the System Power LED.
The System Power LED lights up when the system is connected
to a power source, or when you turn on the system power, and
blinks when the system is in sleep mode.
• Storage Device Activity LED header (+HDD_LED-)
The 2-pin header allows you to connect the Storage Device Activity LED. The Storage
Device Activity LED lights up or blinks when data is read from or written to the storage
device or storage device add-on card.
• Power Button/Soft-off Button header (PWR_BTN)
The 2-pin header allows you to connect the system power button. Press the power
button to power up the system, or put the system into sleep or soft-off mode
(depending on the operating system settings).
• Reset button header (RESET)
The 2-pin header allows you to connect the chassis-mounted reset button. Press the
reset button to reboot the system.
PIN 1
PWR_BTN
PWR_LED+ PWR_LED
-
PWR GND
HDD_LED
+
HDD_LED
-
Ground
HWRST#
(NC)
F_PANEL
+
PWR_LED
-
+
HDD_LED
-
RESET
Chapter 1: Product Introduction