Asus Pro A520M-C II - Chapter 1: Product Introduction; 1.1 Before You Proceed; 1.2 Motherboard Overview

ASUS Pro A520M-C II
1-1
USB56USB34
DDR4 DIMM_A1* (64bit, 288-pin module) DDR4 DIMM_B1* (64bit, 288-pin module)
DIGI+
VRM
CPU_FAN
CHA_FAN2
CHA_FAN1
DP
HDMI
COM2
U32G1_3~6
LAN_USB12
KBMS
DVI
VGA
AUDIO
LPC_DEBUG
F_PANEL
AAFP
SPEAKER
SATA6G_4
CLRTC
SATA6G_3SATA6G_2
SATA6G_1
128Mb
BIOS
TPM
EATX12V
EATXPWR
U32G1_12
AMD
A520
BATTERY
Super
I/O
PCIEX1_1
PCIEX1_2
ASM
1083
PCI
M.2(SOCKET3)
2280 2260 2242
PCIEX16
COM1
LPT
22.9cm(9.0in)
24.4cm(9.6in)
SOCKET AM4
Ethernet
Audio
Codec
CHASSIS
SMBUS
7
8
6
5
13 1012 15 11
3
5 1 24 4
7 1618179
14
Product Introduction
1
1.1 Before you proceed
Take note of the following precautions before you install motherboard components or change
any motherboard settings.
• Unplug the power cord from the wall socket before touching any component.
• Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due
to static electricity.
• Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so
may cause severe damage to the motherboard, peripherals, or components.
Unplug the power cord before installing or removing the motherboard. Failure to do so can
cause you physical injury and damage motherboard components.
1.2 Motherboard overview
Place this side
towards the rear
of the chassis