Asus Pro H610M-C - Product Introduction; Before You Proceed; Motherboard Overview

1-1
1
Pro H610M-C
Product Introduction
1.1 Before you proceed
Take note of the following precautions before you install motherboard components or change
any motherboard settings.
• Unplug the power cord from the wall socket before touching any component.
• Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due
to static electricity.
• Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so
may cause severe damage to the motherboard, peripherals, or components.
Unplug the power cord before installing or removing the motherboard. Failure to do so can
cause you physical injury and damage motherboard components.
1.2 Motherboard overview
Place this
side towards
the rear of the
chassis
ATX_12V
PCIEX16(G5)
PCIEX1(G3)_1
PCIEX1(G3)_2
PCI
SPEAKER
CHASSIS
TPM
128Mb
BIOS
CLRTC
SMBUS
F_PANEL
LPT
COM_DEBUG
USB_914USB_78
U32G1_34
AAFP
COM2
ATX_PWR
CPU_FAN
BATTERY
CHA_FAN
MONO_OUT
Super
I/O
ASM
1083
24.4cm(9.6in)
DDR5 DIMM_A1 (64bit, 288-pin module)
2280 2260 2242
DDR5 DIMM_B1 (64bit, 288-pin module)
AUDIO
KBMS
DP
VGA
DVI
COM1
USB_56
HDMI
22cm(8.7in)
SATA6G_2
SATA6G_1
SATA6G_3
SATA6G_4
Intel
®
H610
M.2(SOCKET3)
M.2(SOCKET3)
PCIE SATA
3.0 X4 X
Audio
Codec
DIGI+
VRM
LGA1700
Ethernet
LAN_U32G2_12
65 1 4
2
19
11 714 1712 15
20
13
4
5
3
16
9
8
7
10
18
The pin denitions in this chapter are for reference only. The pin names depend on the
location of the header/jumper/connector.