Asus PT201 series - Touch Panel and USB Device Connection; Digitizer Pen Connection

11
E
Turning on the power
1. Press the POWER button.
Press
POWER button
Power LED
 ThepowerLEDturnson.
2. Turn on the PC.
 Thescreenappears.
Status Status of the monitor
Greenlit Signalinput
Orangelit Nosignalinput
Alternatelyashingredand
green
Abnormaltemperature
Caution
• WhenswitchingthePOWERbuttonoffandbackon,
alwayswaitforanintervalofatleast5seconds.Rapid
switchingmayleadtoerrorsormalfunctions.
• Hightemperaturesinsidetheunitareindicatedwhenthe
PowerLEDisalternatelyashingredandgreen,andmay
leadtothepowerturningoffautomatically.
• Foracompleteelectricaldisconnection,pulloutthemain
plug.
n
Operation Mode
Whenthemonitoristurnedonforthersttimeafterbeing
shippedfromthefactory,theoperationmodesettingscreen
willbedisplayed.SetittoECOModeorNormalMode.
ECOMode-Ifthereisnooperationfor4hoursormore,the
monitorautomaticallyturnsoffthepower.
NormalMode-Willperformstandardoperation.
Evenafterbeingset,changescanbemadeusing[Operation
Mode],locatedinthemenuofthemonitor.
Turning Power On/Off
Turning off the power
1. Turn off the PC.
2. Depress the POWER button for around 2 seconds.
Depress for around
2 seconds
POWER button
 ThepowerLEDturnsoff.
Caution
• Ifthemonitorwillnotbeusedforalongtime,disconnect
thepowerplugfromthepoweroutlet.
• Thisproductisequippedwithanewtechnologylmonthe
displayforasmoothwriting.Withthissheet,theproduct
enablesanewwritingexperienceondigitizerpenwhichis
includedinthecartonbox.DONOTremovethislmatany
time.