Asus RAMPAGE III FORMULA - CPU Clock Skew [Auto]; IOH Clock Skew [Auto]; Digi+ PWR Mode [T-Balanced]; PWM Volt. Control [Auto]

3-14 Chapter 3: BIOS Setup
3.3.14 CPU Clock Skew [Auto]
Adjusting this item may help enhancing BCLK overclocking ability. You may need
to adjust the IOH Clock Skew item at the same time.
Configuration options: [Auto] [Normal] [Delay 100ps]–[Delay 1500ps]
3.3.15 IOH Clock Skew [Auto]
Adjusting this item may help enhancing BCLK overclocking ability. You may need
to adjust the CPU Clock Skew item at the same time.
Configuration options: [Auto] [Normal] [Delay 100ps]–[Delay 1500ps]
3.3.16 Digi+ PWR Mode [T-Balanced]
[X-Power] Unleashes the power system to push the limit for extreme
overclcoking.
[T-Balanced] Manages to achieve the optimum thermal performance for longer
component life.
3.3.17 PWM Volt. Control [Auto]
Allows you to adjust the MOSFET driving voltage.
Configuration options: [Auto] [6V] [7V] [8V] [9V] [10V]
3.3.18 Load-Line Calibration [Auto]Load-Line Calibration [Auto]
Allows you to select the CPU Load-Line mode.
Configuration options: [Auto] [0% Calibration] [50% Calibration] [Full Calibration]
3.3.19 CPU Voltage OCP [Enabled]
Configuration options: [Disabled] [Enabled]
3.3.20 CPU PWM Frequency [Auto]
Configuration options: [Auto] [250KHz] [500KHz] [750KHz] [1000KHz]
3.3.21 Extreme OV [Disabled]
[Enabled] Enables the Extreme OV function.
[Disabled] Disables this function.
3.3.22 Extreme OC [Disabled]
Configuration options: [Auto] [Mode 1] [Mode 2]