Asus Rampage IV Formula - Page 135

ROG RAMPAGE IV FORMULA 4-5
Chapter 4
Using Advanced Mode
Click on the Advanced Mode tab to adjust the advanced voltage settings.
CPU Ratio
Allows you to manually adjust the CPU ratio.
1. Click the CPU Ratio tab.
2. Click ON to activate the CPU Ratio function. The system automatically reboots for the
changes to take effect.
3. After system reboot, launch TurboV EVO again, and then click the CPU Ratio tab. Drag
the adjustment bar upwards or downwards to the desired value.
4. Click Apply to make the change take effect.
Advanced mode
Applies all changes
immediately
Undoes all changes
without applying
Click to restore
all start-up
settings
Current values
Target values
Voltage
Adjustment
bars
CPU Ratio
Click to restore
all start-up
settings
Adjustment bar
Applies all changes
immediately
Undoes all changes
without applying
• Set the CPU Ratio Setting item in BIOS to [Auto] before using the CPU Ratio function
in TurboV. Refer to Chapter 3 of your motherboard user manual for details.
• The CPU Ratio bars show the status of the CPU cores, which vary with your CPU
model.