3-7ASUS PG32UQX Series LCD Monitor
If the monitor cannot wake up after going into deep sleep, do one of the
followings:
- Press any button on the monitor to wake it up.
- Disable the Deep Sleep function.
• Key Lock: To disable all function keys. Press the OK button for over 5
seconds to cancel the key lock function.
• OSD Setup:
* OSD Position: Adjusts the horizontal position (H-Position)/the vertical
position (V-Position) of the OSD.
* OSD Timeout: Adjusts the OSD timeout from 10 to 120 seconds.
* Transparency: Adjusts the OSD background from opaque to
transparent.
• LiveDash:
* PC Control: When “ON” is selected, the infromation displayed
on the LiveDash OLED panel is controlled by the Armoury Crate
software.
* OSD Control: Sets the information to be displayed on the LiveDash
OLED panel.
When a certain function is selected or activated, some options may not be
available.
* Brightness: Selects the brightness level of the LiveDash OLED panel
on the front of the monitor. The adjusting range is from “OFF” to “Level
3”.
• Information: Shows the monitor information.
• All Reset: “Yes” allows you to restore the default settings.
To Next Page
Loading...
