Asus REPUBLIC OF GAMERS SWIFT PG248Q - Back View

1-3ASUS PG248 Series LCD Monitor
• Turns on the OSD menu when the monitor enters standby mode or
displays the “NO SIGNAL“ message.
5.
Power button/power indicator
• Turns the monitor on/off.
• The color definition of the power indicator is as the below table.
 
White ON
Amber ashing Entering standby mode
Amber Standby mode/No signal
OFF OFF
Red G-SYNC
Green 3D
Yellow ULMB
 
4 5 6 7
8
  This port connects the power cord.
  This port is only available when an HDMI/DisplayPort cable
is connected.
  This port is for connection for a DisplayPort compatible device.
  This port is for connection with an HDMI compatible device.
 . This port is for connection with a USB upstream
cable. The connection enables the USB ports on the monitor.
 . These ports are for connection with USB
devices, such as USB keyboard/mouse, USB flash drive, etc.
 .
 