Asus REPUBLIC OF GAMERS SWIFT PG248Q - OSD Menu Operations; How to Reconfigure OSD Settings; OSD Function Introduction

3-1ASUS PG248 Series LCD Monitor
3.1 OSD (On-Screen Display) menu
 
MOVE/ENTER
BACK
EXIT
ON
Max Refresh Rate
Over Clocking
Blue Light Filter
Color
Image
Input Select
System Setup
Normal Mode HDMI 1920 x 1080@ 60Hz
Racing Mode
ASUS ROG PG248Q
1. Press the ( ) button to activate the OSD menu.
2. Move the
( ) button up/down to navigate through the functions.
Highlight the desired function and press the
( ) button to activate it. If
the function selected has a sub-menu, move the
( ) button up/down
again to navigate through the sub-menu functions. Highlight the desired sub-
menu function and press the
( ) button or move the ( ) button
right to activate it.
3. Move the
( ) button up/down to change the settings of the selected
function.
4. To exit and save the OSD menu, press the
button or move the
(
) left repeatedly until the OSD menu disappears. To adjust other
functions, repeat steps 1-3.
 
 
This function allows you to adjust the refresh rate.
MOVE/ENTER
BACK
EXIT
ON
Max Refresh Rate
Over Clocking
Blue Light Filter
Color
Image
Input Select
System Setup
Normal Mode HDMI 1920 x 1080@ 60Hz
Racing Mode
ASUS ROG PG248Q
• Select “ON” if you want to enable this function.