Asus REPUBLIC OF GAMERSROG SWIFT PG43UQ - Detaching the Arm;Stand (for VESA Wall Mount)

2-3
ASUS LCD Monitor PG Series
2.3 Detaching the arm/stand (for VESA wall
mount)
The detachable stand of this monitor is specially designed for VESA wall
mount.
To detach the arm/stand
1. Disconnect power and signal cables.
2. Separate I/O cover from Rear Cover (1)and then take out screwdriver
from I/O cover (2).
3. Remove the four (4) screws securing the arm to the rear of the
monitor.
4. Detach the stand (arm and base) from the monitor.
1
2
• The VESA wall mount kit ( 100 x 100 mm) is purchased
separately.
• Use only the UL Listed Wall Mount Bracket with minimum
weight/load 28.8 kg (Screw size: M4 x 10 mm).