Asus ROG GR8 II - Turning off Your ROG GR8 II; Putting Your ROG GR8 II to Sleep; Entering the BIOS Setup

ROG GR8 II Series
25
Turning off your ROG GR8 II
If your ROG GR8 II is unresponsive, press and hold the power button
for at least four (4) seconds until your ROG GR8 II turns o.
Putting your ROG GR8 II to sleep
To put your ROG GR8 II on Sleep mode, press the Power button once.
Entering the BIOS Setup
BIOS (Basic Input and Output System) stores system hardware
settings that are needed for system startup in the ROG GR8 II.
In normal circumstances, the default BIOS settings apply to most
conditions to ensure optimal performance. Do not change the
default BIOS settings except in the following circumstances:
• Anerrormessageappearsonthescreenduringthesystem
bootup and requests you to run the BIOS Setup.
• Youhaveinstalledanewsystemcomponentthatrequiresfurther
BIOS settings or update.
WARNING! Inappropriate BIOS settings may result to instability
or boot failure. We strongly recommend that you change the BIOS
settings only with the help of a trained service personnel.