ROG GR8 II Series
33
Upgrading a 2.5-inch storage drive
The ROG GR8 II supports one 2.5-inch HDD or one 2.5-inch SSD for
additional storage capacity.
To upgrade a 2.5-inch HDD or SSD:
1. Follow steps 1 to 5 from the Upgrading memory modules section
to remove the side cover.
2. Remove the screw from the drive bay, then put it aside for later
use.
3. Lift the ap on the SATA connector.
4. Connect the SATA cable to the SATA connector, then push the
ap down to secure the cable.
To Next Page
Loading...
