34
ROG GR8 II Series
5. Secure the HDD/SSD to the brackets using the bundled four
bracket screws. Ensure that the screw holes on the 2.5-inch
HDD/SSD match the screw holes on the bracket.
NOTE: Ensure to secure the R-bracket and L-bracket to the correct
sides, as seen in the illustration below, with the screw hole labeled
2 on the bracket positioned with the screw holes on the HDD/SSD
closest to the connector.
IMPORTANT! The screws sets may vary in size. Ensure to use the
correct screws.
HDD/SSD
R-bracket
L-bracket
HDD/SSD screw hole
Bracket screw hole
To Next Page
Loading...
